Posts Tagged ‘Antique Jewelry’
How to Get Started Making Silver and Gold Jewelry for Profit or Fun.
KDL Jewelry asked:
Jewelry making has long been an art form passed on from father to son, all the way back to ancient times; people have adorned themselves in Silver, Gold, and Gemstone Jewelry,
African tribes, the Native American Indian tribes and numerous ethnic tribes have used Bone carved pendants, Animal Ivory, Bird feathers and Seashells, to fashion accessories to use as jewelry.
Today we give our Jewelry titles ,such as Ethnic Jewelry ,Tribal Jewelry ,Antique Jewelry, Fashion Jewelry and so on .In this article we are going to Talk about Designer Hand made jewelry ,How to make it either for fun or for those really keen students how to do it and make money from your hobby .
Right lets get going .You have two options to start with, you can either buy raw silver from your local distributor, or find a Jewelry Manufacture that will supply you with the materials, there is a choice between 925 or 985 in the grade of silver you buy, I prefer to work in Fine silver 985, but you may find this a little difficult to buy. For the purpose of this article we are going to choose the second option and buy our material from a reputable Jewelry Manufacture and we are going to start with making a simple Sterling silver 925 pendant with a Turquoise cabochon Gemstone.
The majority of tools needed can be purchased form a good hardware store and some of the more hard to find items you will be able to get from either a Silver Jewelry Manufacture or Supplier.
Your heat source can be either a gas bottle with extension hose and flame adjusting nozzle or as we use in our workshop a petrol bellows and hose set with adjustable nozzle, its important witch ever set you buy that you can regulate the flame and heat .Next comes the hand tools you will need a small brass hammer, tweezers about 7inches long, small tin snips, brass block 4inches by 4inches and 1inch thick ,rags,2part epoxy, battery acid, fine grade file , a flexible shaft grinder and a ceramic base to heat your silver on ,here is a handy tip a house brick and unglazed roof tile work just great. That should be enough for you to get started.
Step1 is to cut a strip of silver slightly wider then the thickness of the turquoise and long enough to wrap around the diameter of the gemstone, and carefully cut it so as the 2 ends meet tightly around the gemstone.
Step2, take your solder and place a small amount of flux on the two joins, heat the silver strip till red, apply the solder carefully, and it’s joined. If you haven’t done any soldering before try a few practice runs first, you will be able to use that silver later on.
Step3, take your sterling silver band and place it on a flat piece of silver plate, check that the turquoise still fits, then as in step 2 apply flux and solder the band to the plate.
Step4, remove the excess silver with your tin snips and sand off any rough edges.
Step5,decide on a shape for your bail and cut it out of silver accordingly, bend into shape .now solder that to the pendant ,and while hot dip the whole pendant into a small jar of acid ,rinse in a jar of clear water and dry.
Step6, Place your turquoise into you silver and carefully trim away any surplus silver. Once your happy with the fit you can sand the silver again with fine grade emery paper, give a small amount of epoxy to the inside of the pendant and insert the turquoise stone .Now take a spoon and using the back work it around the pendant to give a snug fit with the silver and allow to dry.
Step7, Using your flexi grinder insert a polishing cloth disc, add some silver polish and buff the silver to the required finish.
The principles above are applied to all silver work; no it’s up to the imagination of the jewelry designer and skillfulness of the jeweler.
Jewelry making has long been an art form passed on from father to son, all the way back to ancient times; people have adorned themselves in Silver, Gold, and Gemstone Jewelry,
African tribes, the Native American Indian tribes and numerous ethnic tribes have used Bone carved pendants, Animal Ivory, Bird feathers and Seashells, to fashion accessories to use as jewelry.
Today we give our Jewelry titles ,such as Ethnic Jewelry ,Tribal Jewelry ,Antique Jewelry, Fashion Jewelry and so on .In this article we are going to Talk about Designer Hand made jewelry ,How to make it either for fun or for those really keen students how to do it and make money from your hobby .
Right lets get going .You have two options to start with, you can either buy raw silver from your local distributor, or find a Jewelry Manufacture that will supply you with the materials, there is a choice between 925 or 985 in the grade of silver you buy, I prefer to work in Fine silver 985, but you may find this a little difficult to buy. For the purpose of this article we are going to choose the second option and buy our material from a reputable Jewelry Manufacture and we are going to start with making a simple Sterling silver 925 pendant with a Turquoise cabochon Gemstone.
The majority of tools needed can be purchased form a good hardware store and some of the more hard to find items you will be able to get from either a Silver Jewelry Manufacture or Supplier.
Your heat source can be either a gas bottle with extension hose and flame adjusting nozzle or as we use in our workshop a petrol bellows and hose set with adjustable nozzle, its important witch ever set you buy that you can regulate the flame and heat .Next comes the hand tools you will need a small brass hammer, tweezers about 7inches long, small tin snips, brass block 4inches by 4inches and 1inch thick ,rags,2part epoxy, battery acid, fine grade file , a flexible shaft grinder and a ceramic base to heat your silver on ,here is a handy tip a house brick and unglazed roof tile work just great. That should be enough for you to get started.
Step1 is to cut a strip of silver slightly wider then the thickness of the turquoise and long enough to wrap around the diameter of the gemstone, and carefully cut it so as the 2 ends meet tightly around the gemstone.
Step2, take your solder and place a small amount of flux on the two joins, heat the silver strip till red, apply the solder carefully, and it’s joined. If you haven’t done any soldering before try a few practice runs first, you will be able to use that silver later on.
Step3, take your sterling silver band and place it on a flat piece of silver plate, check that the turquoise still fits, then as in step 2 apply flux and solder the band to the plate.
Step4, remove the excess silver with your tin snips and sand off any rough edges.
Step5,decide on a shape for your bail and cut it out of silver accordingly, bend into shape .now solder that to the pendant ,and while hot dip the whole pendant into a small jar of acid ,rinse in a jar of clear water and dry.
Step6, Place your turquoise into you silver and carefully trim away any surplus silver. Once your happy with the fit you can sand the silver again with fine grade emery paper, give a small amount of epoxy to the inside of the pendant and insert the turquoise stone .Now take a spoon and using the back work it around the pendant to give a snug fit with the silver and allow to dry.
Step7, Using your flexi grinder insert a polishing cloth disc, add some silver polish and buff the silver to the required finish.
The principles above are applied to all silver work; no it’s up to the imagination of the jewelry designer and skillfulness of the jeweler.
Egyptian Jewelry – the Amazing Gold Work in Egyptian Jewelry
Imran ali asked:
People love to wear antique jewelry in 18k pure yellow gold. Egyptian jewelry is of particular importance in this category as it is mostly made of solid gold and silver. These ancient jewelry articles include pendants, rings, earrings, and bracelets. The beauty and allure of these articles is sometimes enhanced by using lovely gemstones in various colors. Egyptian gold work comprises of filigree and engraved letters and symbols. Other shapes are also carved beautifully and expertly. These shapes include the Scarab, King Tut’s mask, stone eye of Horus, Akhenaten Ankh, Lotus Flower, and the Pyramid. Sterling silver jewelry can also be found in this category which is equally beautiful and attractive.
In ancient Egypt, soldering and welding were commonly employed to fuse different metals together. The gold work included techniques such as engraving and incised work. In addition to these, chased work was also used to create wonderful jewelry articles. Incised carving is normally used on wood to produce intricate works of art. Reverse hammering is used in repousse to decorate different metals including gold. Repousse is a French word and this technique is commonly seen in ancient Egyptian pendants and rings. Embossing and chasing are also used to create beautiful jewelry articles of the ancient style.
Sculptures and statues are popular items among ancient Egyptian jewelry. These are finished with different kinds of stone settings and marble bases. Hammering and other gold works are used to create a unique look. Repousse and chasing are still practiced in jewelry making by using modern and state-of-the-art machines. Different kinds of knives, hammers and saws were used by Egyptian artisans to produce intricate jewelry articles. The designs are still very much popular in all parts of the world. Plaster of Paris and resin materials are used to form strong settings.
The preserved Egyptian jewelry in the tombs of ancient kings shows lovely works of gold and silver. The jewelry of Tutankhamen’s (or King Tut’s) time is mostly composed of gold filigree and intricate gold patterns. Colored glass and semi-precious stones like feldspar, opal, lapis, garnet and jasper were also used to enhance the elegance of these jewelry articles. The pectoral is one of the excellent examples of Egyptian gold work. In addition to this, the Scarab and Egyptian amulets are also beautiful works of art. They are still very popular across the globe and loved by stylish people and those who like to collect antiques.
Ancient Egyptian jewelry, also known as the jewelry of the dead, is amazing and incredible. One can find intricate and delicate works of art along with different gold work techniques which are still in use by modern artisans. Plain gold rings, armlets and bracelets with ancient symbols, and Bedouin earrings are examples of stunning Egyptian ornaments. In addition to these, the pectoral which was worn as a jewelry article on the chest was decorated with inlaid gold work and lovely gemstones. The jewelry of kings and queens from Egypt is undoubtedly the most beautiful and lovely example of ancient gold work.
People love to wear antique jewelry in 18k pure yellow gold. Egyptian jewelry is of particular importance in this category as it is mostly made of solid gold and silver. These ancient jewelry articles include pendants, rings, earrings, and bracelets. The beauty and allure of these articles is sometimes enhanced by using lovely gemstones in various colors. Egyptian gold work comprises of filigree and engraved letters and symbols. Other shapes are also carved beautifully and expertly. These shapes include the Scarab, King Tut’s mask, stone eye of Horus, Akhenaten Ankh, Lotus Flower, and the Pyramid. Sterling silver jewelry can also be found in this category which is equally beautiful and attractive.
In ancient Egypt, soldering and welding were commonly employed to fuse different metals together. The gold work included techniques such as engraving and incised work. In addition to these, chased work was also used to create wonderful jewelry articles. Incised carving is normally used on wood to produce intricate works of art. Reverse hammering is used in repousse to decorate different metals including gold. Repousse is a French word and this technique is commonly seen in ancient Egyptian pendants and rings. Embossing and chasing are also used to create beautiful jewelry articles of the ancient style.
Sculptures and statues are popular items among ancient Egyptian jewelry. These are finished with different kinds of stone settings and marble bases. Hammering and other gold works are used to create a unique look. Repousse and chasing are still practiced in jewelry making by using modern and state-of-the-art machines. Different kinds of knives, hammers and saws were used by Egyptian artisans to produce intricate jewelry articles. The designs are still very much popular in all parts of the world. Plaster of Paris and resin materials are used to form strong settings.
The preserved Egyptian jewelry in the tombs of ancient kings shows lovely works of gold and silver. The jewelry of Tutankhamen’s (or King Tut’s) time is mostly composed of gold filigree and intricate gold patterns. Colored glass and semi-precious stones like feldspar, opal, lapis, garnet and jasper were also used to enhance the elegance of these jewelry articles. The pectoral is one of the excellent examples of Egyptian gold work. In addition to this, the Scarab and Egyptian amulets are also beautiful works of art. They are still very popular across the globe and loved by stylish people and those who like to collect antiques.
Ancient Egyptian jewelry, also known as the jewelry of the dead, is amazing and incredible. One can find intricate and delicate works of art along with different gold work techniques which are still in use by modern artisans. Plain gold rings, armlets and bracelets with ancient symbols, and Bedouin earrings are examples of stunning Egyptian ornaments. In addition to these, the pectoral which was worn as a jewelry article on the chest was decorated with inlaid gold work and lovely gemstones. The jewelry of kings and queens from Egypt is undoubtedly the most beautiful and lovely example of ancient gold work.